Stormwater Atlas

City of Pittsburgh

Stormwater Design Manual

CityPennsylvaniahighNoCitations verified
Fields not found in document: document_metadata.version_or_edition, document_metadata.adoption_or_effective_date, document_metadata.last_revised_date, design_criteria.design_storm_return_periods_years, design_criteria.required_hydrologic_hydraulic_software

Document Metadata

Jurisdiction level
City

“City of Pittsburgh”

Title

State
Pennsylvania

“Pennsylvania / Title Thirteen”

Introduction

Version / edition
Not found in document

No evidence cited

Adoption / effective date
Not found in document

No evidence cited

Last revised date
Not found in document

No evidence cited

Relationship to state manual
independent

“Title Thirteen Stormwater Management”

Introduction

Design Criteria

Design storm return periods (years)
Not found in document

No evidence cited

Water quality volume method
Volume Control (Section 2.2.a): stormwater facilities shall capture at least the first two (2) inches of runoff; volume control tied to managing runoff from the 95th percentile storm (§1303.03). Includes water quality treatment, volume control offsets/incentives. Rate Control (Section 2.2.b) uses NOAA Atlas 14 climate-change design rain events.

“Stormwater facilities shall capture at least the first two (2) inches of runoff”

Section 2.2.a Volume Control

Peak flow calculation method(s)
Rate control modeling requirements (Section 2.2.b), NOAA Atlas 14 and climate change design rain events, Rate control points of interest

“NOAA Atlas 14 and Climate Change Design Rain Events”

Section 2.2.b.i

Hydrologic/hydraulic software
Not found in document

No evidence cited

Approved BMP categories
Green roofs / rain gardens, Volume control BMPs, Rate control facilities, Stormwater BMP design standards (Section 4)

“green roofs and rain gardens”

Section 2.2.a